RTO ID: 45490

Facebook-f Instagram Linkedin-in
Book now, Pay later

TLID0008 – Shift Loads Using Bridge or Gantry Crane

Training course for using a bridge or gantry crane to lft loads, where the crane has 3 or less powered moves. TLID0008

TLID0008 – Shift Loads Using Bridge or Gantry Crane

TLILID0008 – This unit is designed to teach participants how to assess risks, assess loads and lifting requirements, to safely use a Bridge or Gantry Crane in lifting loads.

The subject is nationally recognised and can only be delivered by a Registered Training Organisation (RTO) that complies with the governing standards of quality control and quality training and assessment. Assessment is based on competency i.e. ability to perform tasks to a required standard. Being able to read and write English suitable to understand the regulations and undertake the written test.

Book Now
See Availability

Course Overview

It includes planning work for the prevailing working conditions, using controls and operating systems to manage the operation of equipment, and locating and identifying load characteristics. It also includes safely moving the load; monitoring controls and stopping, shutting down and securing equipment after the completion of operations.

Work is performed under some supervision generally within a team environment.

Where the load shifting equipment operated is considered to be high risk work, the operator must hold a high-risk work licence.

Course Cost:

This course attracts a fee of $750.00 per participant and is GST exempt. These fees cover all training, assessment, use of machinery/equipment, stationary (books, pens, use of calculator and resources) and most importantly, the amazing experience.

A 50% deposit is required when making a booking as spaces are limited. Corporate rates and group pricing is also available.

Deposits are fully refundable if your booking is cancelled with more than 7 days’ notice from your course start date. If the booking is cancelled within seven or less days’ notice, then only 50% of the booking fee is refundable.

The full course fee must be paid prior to the final assessment and prior to issuing any official course outcome documentation (Statement of Attainment). In the event that we have not received the full payment, we will withhold the documentation which will then be sent via Registered Mail upon receipt of payment, at no additional cost. Upon completion of the course, the participant will be issued a statement of attainment in the above unit.

Course Pre-requisites:

  • Participants must be 18 years of age or older
  • All participants need to be able to speak and understand English
  • Have a (USI)-Unique Student Identifier, please visit https://www.usi.gov.au/if you do not have one.

Course Duration:

1 Day but can exceed depending on the number of participants.

Dress Code:

PPE must be worn, capped safety boots, high visibility clothing and hard hat.

Upon Successful Completion:

  • Nationally recognised Statement of Attainment (SOA) for fulfilling the requirements of TLID0008 Shift Loads using Bridge or Gantry Crane.

Frequently Asked Questions

If you successfully complete the training and assessment, you'll receive a nationally recognised Statement of Attainment (SOA) for TLID0008. This is issued by Training Combined as a Registered Training Organisation (RTO 45490) and is recognised across Australia.

No, and this is worth understanding clearly. The TLID0008 is a short course for operating cranes with 3 or fewer powered movements. It results in a Statement of Attainment, not a High Risk Work Licence. If your workplace requires you to operate a crane from a permanent cabin or one with more than 3 powered operations, you'd need to pursue the CB Licence (TLILIC0016) through a separate pathway. Not sure where you sit? Get in touch and we can help figure out which qualification is right for your role.

For the TLID0008 course, no dogging licence is required as a pre-requisite for this short course. That said, if your work involves slinging loads or directing a crane operator when the load is out of their line of sight, you would need a Dogging Licence separately. The two qualifications complement each other well in a lot of workplace settings.

This course is suited to a wide range of industries including manufacturing, warehousing, engineering workshops, steel fabrication, automotive and general industrial settings all commonly use pendant-controlled bridge and gantry cranes. If your workplace has an overhead crane running on a fixed runway and you're expected to operate it as part of your role, this is the course for you.

Statements of Attainment don't technically expire and once issued, the qualification remains on your record. However, many employers and worksites require evidence of recent, current competency, and it's common practice to undertake a Verification of Competency (VOC) every couple of years to demonstrate you're still up to standard. Always check your employer's specific requirements.

Absolutely and prior experience is a bonus, not a barrier. Whether you're new to crane operation or you've been using one on the job without formal certification, this course is open to you. The assessment is competency-based, meaning you're assessed on your ability to perform the tasks safely and correctly, so experienced operators often move through the practical components with confidence.

No and this is something we're genuinely proud of! Unlike many RTOs across Australia that charge between $300 and $400 per additional attempt, we do not charge any re-assessment fees for our High Risk Work Licence training programs. If you need another attempt to demonstrate competency, we'll work with you to get there without any extra financial pressure. Our focus is on your success, not adding unexpected costs to your training journey.

Location of Training

1-3 Mary Street, Regents Park, NSW 2143 AUSTRALIA
Important:

We do not charge a re-assessment fee for HRW licensing courses. Train with confidence knowing there are no $300–$400 re-sit penalties.

750.00 Book Now

    Include

  • 3 Days
High Risk Work Licence Course Calendar Jan - June 2026High Risk Work Licence Course Calendar July - December 2026Short Courses Calendar Jan - June 2026Short Courses Calendar July - December 2026

Book now

"*" indicates required fields

Course Name : Shift Loads Using Bridge or Gantry Crane

Code : TLID0008
Address
DD slash MM slash YYYY
0403 415 066 | 0431 298 766

for general enquiries

Email us

Location

1-3 Mary Street, Regents Park, NSW 2143 AUSTRALIA

course enrolment

To enrol for a Course with Training Combined, please complete our online Enrolment form via the button below.

ENROL NOW
take LLND Test
Enrolment Agreement